Intools Basic : Instrument type

work stages in intools V6 :

Create :
A. Instrument Type
B. Instrument Tag ( tag name/ tag number )
C. Instrument Loop ( Loop Number )
D. Instrument Index
E. Instrument I/O List
F. Instrument Cable Schedule.
G. Instrument wiring ( Junction box, marshalling, cabinet control system )
H. Instrument Loop Diagram
I. Instrument Calculation
J. Instrument data sheet ( Instrument Spec )


+++ in this post we will make instrument type, tag, loop, from loop : 001-v-100
referring to this :

A. Instrument Type
1. Create SDV : klik Index > Table > Instrument type > on Process function choose general > new > type like no. 6 "SDV" > P1 = Project 1 ( to differentiate with the other )

2. on general tab > location, choose field & beacuse SDV as a valve not have I/O on tab wiring control just empty it > apply > OK.

3. SDV has benn made > apply > OK

4. Create SDY > Process function > General > new > type like no.3 > Profile

5. on general tab > system I/O type: DO > Location field

6. on wiring & control system tab > follow this picture:

7. continues with :

8. wiring for SDY has been made > apply > ok

for instrument type SDV & SDY already done, but for ZSC, ZSO, ZIC, & ZIO not yet ( See +++ )
to create ZSC & ZSO ( I/O = DI ) the to making it is the same like making SDY ( I/O = DO )

to create ZIC dan ZIO ( without I/O beacuse soft tag ) is the same way like making SDV ( without I/O becuase it is a valve )